The three French seaward TBMs encountered water inflows almost immediately, forcing the use of the sealed mode of operation much earlier than anticipated. Machines were deployed on both sides of the tunnels in December 1987. The machines generated a maximum 5,727,084 N-m (4,227,660 lb-ft) of torque. The 8.36m (27 ft) diameter machines included 13 inch (330 mm) cutters and 65,871 kN (14,821,000 lb) of thrust. Robbins designed these machines to withstand unstable and faulted rock conditions. terminal because fewer water inflows were predicted. Two Double Shield TBMs were built for the U.K. This machine featured a 5.6 m (18 ft) diameter cutterhead, a cutterhead thrust of 39,227 kN (8,837,000 lb), and a maximum torque of 3,510,781 N-m (2,591,000 lb-ft). The undersea French side of the Channel Service Tunnel also required an EPBM. Robbins built two EPBMs for the French side of each Main Rail Tunnel. These machines featured sealed cutter chambers to withstand high water pressures and screw conveyors to carry the cut material from the face. The high water pressures predicted in the folded and faulted chalk on the French side required the use of three Earth Pressure Balance machines (EPBMs). Robbins built five machines for this project, each designed for the geology of a specific length of tunnel. The Chalk is much more faulted and prone to water inflows on the French side of the tunnels. The bottom of the tunnels pass through stiff clay with some swelling characteristics. This rock is a weak sandstone with a stronger rock strength than the Chalk. Below the Chalk Marl is a thin 2 m (6.5 ft) band of permeable Glauconitic Marl. The majority of the Channel Tunnel passes through chalk marl, much of it faulted. The contractor for the project, Transmanche-Link (TML) chose five Robbins TBMs to participate in boring the crossings. This service tunnel allows maintenance workers to access the rail tunnels at regular intervals. In between the two tunnels is the Channel Service Tunnel, which is connected by cross-passages to the main tunnels. Two Main Rail Tunnels, about 30 m (98 ft) apart, carry trains from the north and from the south. This link consists of three parallel tunnels running for 39 km (24.2 mi) under the sea. The Channel Tunnel, one of the world’s most famous tunnels, is a 50 km (31 mi) tunnel under the English Channel linking Great Britain to France.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |